Design a Garage shed – useful tips

Designing a garage shed made easy

Building a garage shed can be a wise investment if done correctly. A garage shed provides protection for your vehicles, adds value to your property and can provide extra storage space.  Surprisingly, building your own garage shed is a lot easier than it seems.

We have a list of tips below that can help guide you with designing the perfect garage for your needs.

Planning a garage shed

Before starting to design your garage you should first ask yourself, what is the purpose of my garage shed project?

Each customer will have a different answer based off their intended use.

Do I require a garage solely of storing vehicles?

What are the dimensions of the vehicles I intend to park inside?

Do I require extra storage space either side of the vehicle for racking?

Do I require workshop space?

Are there any other requirements my garage must have?


After defining the purpose of your garage, we recommend measuring the dimensions of the vehicles you intend to park in your completed garage.

If the garage is for multiple vehicles, park each vehicle side by side with enough room between to open a door. Then measure the length, width and height needed; these measurements will form the basis of your garage dimensions.


Deciding on the garage location

Now it may not seem like much but choosing the right location is essential!

In residential areas we recommend having the garage setback at least 1m from your neighbour’s boundaries to not only help with building the shed but to help with passing your proposed garage through council. Some zoning may require setbacks greater than 1 metre so it’s best to check with your council first.

A good idea is to Peg out the location of the proposed garage shed, this is going to give you a great visual of the overall size of the garage. It will also help identify any problems which you may encounter such as trees, underground services and ground levels which will affect the foundation.

At this time make sure you also check that vehicle’s will be able to access the garage. You don’t want to be conducting 3 point turns every time you drive in and out of your garage.

Once you are happy with the location and dimensions, it’s time to think about your project budget.


Working out your budget

It’s always wise to work out your project budget early on in the design process so you don’t waste time designing something you won’t be able to afford.


Working out your project budget can be done in 2 ways.

  1. If you are fixed on the size you would like your garage shed, you can get some garage kit supply quotes and then double that price to get a total project cost to use as your budget.
  2. If you already have a fixed budget in mind, half your fixed budget should be allocated to the garage kit purchase, so get some supply quotes at about half your budget price.


Garage design tips

Choosing your roof shape – A garage roof design can be gable, skillion or a combination of both. Garage and shed roofs are most commonly a gable shaped design but skillion designs are becoming more popular and provide a more modern look. Skillion roofs can also be a cheaper option in most cases.

Choosing the main openings – The openings of a garage shed can include large steel sliding doors, roller doors or sectional roller doors and depending on the application, each has their pros and cons.


Roller Doors

When deciding on roller doors the main considerations is opening height and widths of openings.

If you plan on building a double garage, consider the option of one wide roller door instead of two smaller roller doors; it can work out cheaper in many instances especially if you intend on adding electric motors.



  • Roller doors are the most common and generally the cheapest option, especially if you plan on your garage being a DIY project.
  • They are the easiest to install and provide quite a good weathertight seal.


  • Roller doors can have restricted opening heights due to the roller door drum depth.
  • Larger roller doors require chain drives or motors to open/close, increasing their price.
  • Roller doors require servicing to keep running well.



Steel Sliding Doors

Steel sliding doors are a great low maintenance option and provide the benefit of having the largest openings, however the upfront cost is usually more.



  • Allows larger openings both in width and height
  • No servicing required



  • More expensive to buy and install
  • Less weatherproof from wind driven rain.


Sectional Roller Doors

Sectional doors are another option but are generally not included in prefab garage kits but can be supplied and installed through a separate company.



  • Allow a higher opening height than roller doors for a given wall height.
  • Provide the most weather tight seal
  • Can be made wider than the widest roller doors.



  • Need to be installed by a professional
  • Require regular servicing


Customizing your garage

Whilst there are many options available for customizing garage sheds, we thought we would quickly mention a few of the most useful.


Personal access door

We always recommend adding a Personal access door (PA Door) to your garage. A PA door makes your garage easily accessible without the need to open your garages main opening.

Tip: if electric motors are fitted to your roller doors, consider adding a PA door as it avoids you being locked out of your garage in the event of a power outage.


Roof insulation

The best way to keep your garage cool in the warmer months is to add insulation.

Insulation options include a blanket type or foam foil type, each having their pros and cons.

Tip: A garage in summertime can be almost unbearable to be in for any extended period of time.  If you are on a budget, consider insulating just the roof area, which will provide the best value for your dollar.


Electric motors and chain drives

On roller doors, electric motors or chain drives become a must have when the roller door opening height becomes too high to reach with your hands.

Tip: Consider adding automatic openers to your roller doors for your convenience especially during the rainy winter months. No one wants to be getting out of their car in the rain to open a garage door by hand.


Making your shed extendable

If  you would like a larger garage than your budget can currently afford, consider designing your garage to be extendable. This will allow you to easily extend your garage at a later date.

Garage designs these days can offer the flexibility to upgrade end portals for future garage extensions to either the front, back or add a lean-to to the side.

When you are beginning the enquiry process of designing a garage, be sure to check with one of our team members about your options regarding future garage extension or any additional add-on options for your garage. You can also learn more by heading over to our garage sheds page